SONIQ QMD93B - Manual (Page 11)

-10-
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
Dolby Digital
Dolby Digital is a technology developed by Dolby Laboratories. Soundtracks encoded in Dolby Digital can
reproduce from one to 5.1 discrete channels of excellent quality audio.
The unit automatically recognizes the Dolby Digital bitstream and provides a downmix suitable for two-channel
listening. An additional Dolby Digital decoder is required for reproduction of the discrete multi-channel soundtracks
available on many DVDs.
Connections
Sound System
A. Connecting a TV
If your TV has audio/video inputs, you can also connect the unit to your TV using the Audio/Video cable, and watch
DVD on your TV screen.
Audio/Video cable
To AUDIO / VIDEO
OUT jacks
LEFT SIDE OF UNIT
TV
White Red
Yello
w
B. Using Headphones / Earphones
• Turn down the volume before connecting, and then
adjust the level.
• When headphones / earphones are connected, no
sound will be emitted from the unit's speaker.
Caution:
• Avoid listening to sound at levels which may be harmful
to your ears.
LEFT SIDE OF UNIT
Headphones /
Earphones
(3.5mm diameter plug)
Watching a DVD on your TV
1. Turn on the unit. Set "Video Out Only" to "ON" in the Video Setup menu. (Refer to
Video on page 16.)
2. Turn on the TV and set its source to AV or similar (see the TV instruction manual for details).
Notes:
• The unit TFT LCD screen will be off when output video to the TV. The TFT LCD screen will be on again
automatically after the unit is power off and on again.
• If you accidentally activate "Video Out Only" when the unit is not connected to a TV, please turn the unit off and
then back on to restore output on the unit's screen.
White Red Yellow