SONIQ CWR150NS - Manual (Page 83)

- 82 -
Select File Click Browse to select the firmware file.
Upload
After selecting the firmware file, click Upload to
starting upgrading the firmware file.
Reset Click it to starting selecting the firmware file.
3.7.2.2 Backup/Restore
Click Backup/Restore in the left pane, the page shown in the following figure
appears. You can backup the current settings to a file and restore the settings from
the file that was saved previously.
The following table describes the parameters and button of this page:
Field Description
Save Settings to File
Click it, and select the path. Then you can save
the configuration file of the router.
Load Settings from File Click Browse to select the configuration file.
Upload
After selecting the configuration file of the
router, click Upload to start uploading the
configuration file of the router.
3.7.3 System Log
Choose Admin > System Log, the page shown in the following figure appears. In
this page, you can enable or disable system log function and view the system log.