SONIQ CWR150NS - Manual (Page 46)

- 45 -
Field Description
to WEP. Click it, the Wireless WEP Key Setup
page appears.
WPA Authentication
Mode
Select Personal (Pre-Shared Key), enter the
pre-shared key in the Pre-Shared Key field.
Select Enterprise (RADIUS), enter the port,
IP address, and password of the Radius server.
You need to enter the username and password
provided by the Radius server when the wireless
client connects the modem.
If the encrypton is set to WEP, the modem uses
802.1 X authentication, which is Radius
authentication.
Click Set WEP Key, and the following page appears.
The following describes the parameters of this page:
Field Description
Key Length
Choose the WEP key length. You can Choose
64-bit or 128-bit.