beautypg.com

Warning – SONIQ AWM1701 User Manual

Page 4

background image

4. Installing Decorative Covers

5. Installing VESA Plate

X

X

• When installing wall mounts on cinder block, verify the actual concrete thickness is at least
1-3/8" (35mm) for using the concrete anchors. Do not drill into mortar joints! Be sure to
mount in a solid part of the block, generally 1" (25mm) minimum from the side of the block.
It is suggested electric drill on slow setting is used to drill the hole instead of a hammer drill
to avoid breaking out the back of the hole when entering a void or cavity.

• Installer must verify that the supporting surface will safely support the combined load of the
equipment and all attached hardware and components.

WARNING

3b. Solid Brick and Concrete Block Mounting:

60mm/2.4"

ø 10mm
ø 3/8"

Drill pilot holes

1

2

Screw the wall
mount onto
the wall

with the up arrow of the plate upward

W-B

W-C

W-A

-5-

-6-