Figure “a – Rite-Ride 2528 User Manual

Page 2

background image

FIGURE “A”

LEAF SPRINGS

AIR

SPRING

UPPER

BRACKET

INSERT

ALIGNMENT PIN

3/8ʺ-16 X 2ʺ

FLATHEAD BOLT

NOTE: THE JOUNCE BUMPER CUP

STAYS ON THE FRAME AFTER THE

JOUNCE BUMPER IS REMOVED.

THE UPPER BRACKET FITS AROUND

THE JOUNCE BUMPER CUP.

NOTE: TALL LEG FACES

TOWARDS FRONT OF VEHICLE!

3/8ʺ-16 X 7ʺ

CARRIAGE

BOLT

3/8ʺ-16 X 5/8ʺ

FLATHEAD BOLT

BAIL

CLAMP

3/8ʺ-16 FLANGE NUTS

TO BAIL CLAMP

AXLE

3/8ʺ-16

FLANGE LOCK NUTS

The

INSERT must be pushed into

the jounce bumper cup and then

twisted into place to capture the

flanges on the inside of the cup.

See Figure “B”.

NOTE: All illustrations are of the left

or driver’s side of the truck. Refer to

step 3 for proper lower bracket alignment.

BRACKET CLAMP

3/4ʺ-16

HEX NUT

3/4ʺ INTERNAL

TOOTH LOCK

WASHER

REAR