Crimestopper Security Products SERIES II CS-2004TW2 - Manual (Page 21)

VALET PARK VALET DATA TRANSLATE IGN TRIGGER (FLASH) SHOCK SENSOR (FLASH)
WARN AWAY (FLASH)
OPERATION
ACTIVE ARMING
To arm the alarm and lock the doors, press the #1 Button on any remote. You will hear a single siren chirp and the
lights will flash once. The system will arm, the doors will lock (optional) and the starter will be disabled. The red in-
dash LED in the vehicle will begin to flash. After a short delay of 10-15 seconds to allow vehicle and electronics to
stabilize the system will be completely armed.
DISARMING
To disarm the alarm and unlock the doors, press the #2 Button on any remote. You will hear 2 siren chirps and the
lights will flash twice. The in-dash LED stops flashing dome light turns on (Optional). If the alarm is currently
tripped, then the #2 Button will have to be pressed two times. The first press will only reset the trigger and the
second press will Disarm the system. See “ARMED CYCLE RESET”.
21