1 technical data, 2 safety, transport, storage and disposal, 1 intended use – Richter RSI Series User Manual
Page 3: 3 product description, Intended use, 1technical data, 2safety, transport, storage and disposal, 3product description, Series rsa
Series RSA
,
Mechanical Seals, external, single or
Page 3
double, type Crane 58U – 58U
9485-060-en
Revision 11
TM 8046
Edition 10/2010
1
Technical data
Manufacturer :
Richter Chemie-Technik GmbH
Otto-Schott-Str. 2
D-47906 Kempen
Telephone: +49 (0) 2152 146-0
Fax:
+49 (0) 2152 146-190
E-Mail:
Internet:
Richter EP (Nanjing) Co., LTd.
No. 18 Ailing Rd., Moling,
Jiangning Dev. Zone
211111 Nanjing
P.R. China
Telephone: +86 (0) 25 / 5275 1718
Fax:
+86 (0) 25 / 5275 1747
E-Mail:
Internet:
Authorised person acc. to machinery directive
2006/42/EG: Gregor Kleining
Designation :
Series RSA, RSI mechanical seal:
External, single
double type Crane 58U – 58U
Materials :
Seal housing:
Stainless steel
Wetted parts:
Mechanical seal: SSiC, Al2O3/PTFE glass, etc.
see also data sheet
Temperature range :
see installation and
operating manual RSA or RSI, Section 1
2
Safety, transport, storage and disposal
The relevant sections in the adjacent installation and
operating manuals apply to safety, transport and
storage.
This installation and operating manual is only valid in
conjunction with the installation and operating
manuals of
RSA long life grease and oil bath lubrication
Bearing pedestal group 1 and 2
9485-050-en
or
RSI long life grease and oil bath lubrication
Bearing pedestal group 1
9480-050-en
2.1 Intended use
Mechanical seals for plastic-lined pumps of the series
RSA and RSI are suitable for the use of aggressive,
and pure media.
Observe the instructions contained in the
operating manual or contractual documentation; if
necessary, consult the manufacturer.
All important features are documented in the data
sheet included in the scope of delivery.
3
Product description
For a product description of the pump, see the
installation and operating manual for the RSA or RSI
series.
See Section 7.3
The sectional drawing shows an external, single
mechanical seal.
See Section 7.4
The sectional drawing shows a double mechanical
seal type Crane 58U – 58U.