Richter MNK Series User Manual
Sealless chemical magnetic drive pump, Series mnk
INSTALLATION AND OPERATING MANUAL
Translation of the original manual
Keep for future use!
This operating manual must be strictly observed before
transport, installation, operation and maintenance
Subject to change without notice.
Reproduction is generally permitted with indication of the source.
© Richter Chemie-Technik GmbH
9230-050-en Revision 11 Edition 07/2010
Series MNK
Sealless Chemical
Magnetic Drive Pump
Bearing lubrication: Grease and oil bath
Bearing pedestal group: 1+2
Table of contents
Document Outline
- INSTALLATION AND OPERATING MANUAL
- List of Contents
- Relevant documents
- 1 Technical data
- 2 Notes on safety
- 3 Transport, storage and disposal
- 4 Product description
- 5 Installation
- 6 Commissioning/Shutdown
- 7 Maintenance
- 7.1 Screw connections of the housing
- 7.2 Bearing pedestal
- 7.3 Cleaning
- 7.4 Stand-by pumps
- 7.5 Notes on dismantling
- 7.6 Dismantling
- 7.7 Notes on assembly
- 7.8 Assembly
- 7.8.1 Assembly of drive unit Long life grease lubrication
- 7.8.2 Assembly of drive unit Oil bath lubrication
- 7.8.3 Perform trial assembly of plain bearing pedestal with impeller, inner magnet assembly and plain bearings
- 7.8.4 Determine thicknesses S1 and S2 of the distance washers 551.
- 7.8.5 Final assembly
- 7.8.6 Fill bearing pedestal with oil
- 7.9 Tests
- 8 Malfunctions
- 9 Sectional drawing
- 10 Assembly aids
- Operating limits
- Declaration of Conformity with ATEX
- Declaration of Conformity without ATEX
- Safety Information / Declaration of No Objection