Richter MNKA Series (ASME) User Manual
Sealless chemical magnetic drive pump, Series mnka acc. to asme
INSTALLATION AND OPERATING MANUAL
Translation of the original manual
Keep for future use!
This operating manual must be strictly observed before
transport, installation, operation and maintenance
Subject to change without notice.
Reproduction is generally permitted with indication of the source.
© Richter Chemie-Technik GmbH
9250-050-en Revision 11 Edition 07/2010
Series MNKA acc. to ASME
Sealless Chemical
Magnetic Drive Pump
Bearing lubrication: Long life grease and
oil bath
Bearing pedestal group: 1 and 2
Table of contents
Document Outline
- INSTALLATION AND OPERATING MANUAL
- List of Contents
- Relevant documents
- 1 Technical data
- 2 Notes on safety
- 3 Transport and storage
- 4 Product description
- 5 Installation
- 6 Commissioning/Shutdown
- 7 Maintenance
- 7.1 Screw connections of the housing (casing)
- 7.2 Bearing pedestal
- 7.3 Cleaning
- 7.4 Stand-by pumps
- 7.5 Notes on dismantling
- 7.6 Dismantling
- 7.7 Notes on assembly
- 7.8 Assembly
- 7.8.1 Assembly of the bearing pedestal, long life grease lubrication
- 7.8.2 Assembly of the bearing pedestal, oil bath lubrication
- 7.8.3 Drive magnet assembly
- 7.8.4 Assembly of can unit
- 7.8.5 Perform trial assembly of the plain bearing pedestal with impeller, inner magnet assembly and plain bearings
- 7.8.6 Checking bearing play Z and impeller distance X
- 7.8.7 Final assembly
- 7.8.8 Fill bearing pedestal with oil
- 7.9 Tests
- 8 Faults
- 9 Sectional drawing
- Operating limits
- Declaration of Conformity with ATEX
- Declaration of Conformity without ATEX
- Safety Information / Declaration of No Objection