Revel C32 - Manual (Page 6)

6
Unpacking
(continued)
To unpack the C32:
1. Place the packing carton upright on a
soft towel or carpeted floor and fully
open the top flaps as shown in step 1
of Figure 1 (above).
2. Without allowing the top flaps to
close, stand the packing carton in
an inverted position as shown in
step 2 of Figure 1 (above).
3. Lift the packing carton off of the
loudspeaker as shown in step 3 of
Figure 1 (above). Use caution to
avoid damaging the loudspeaker
cabinet. At this point, the
loudspeaker will be upside-down.
4. Remove the left and right pads and the
grille identified in Figure 2 (below).
5. Remove the spike footing attached to
the left pad as shown in Figure 2
(below).
Bottom
Top
Bottom
Top
1
2
3
Figure 1: Unpacking the C32
Right Pad
Left Pad Protective
Bag
Grille
Spike
Footing
Figure 2: Packing Materials