Revel Salon 2 - Manual (Page 17)

Ultima Salon2/Studio2
Owner’s Manual 15
SINGLE WIRE CONNECTIONS
Single-wired connections are the most common. These are made
between one pair of the Salon2/Studio2 input terminals and one
power amplifier output channel as shown in Figure 8.
To make single-wired connections:
1. Connect one pair of loudspeaker wires to the desired Salon2/
Studio2 input terminals. Then connect the same pair of
loudspeaker wires to the desired power amplifier output chan-
nel. (The high frequency input terminals are recommended).
2. Make sure that all terminals are firmly hand-tightened.
Figure 8: Single-Wired Connections
OUTPUT
POWER
AMPLIFIER
STUDIO2
Normal
Contour
Boundary