Revel S12 - Manual (Page 6)

6 REVEL Concerta S12
Owner’s Manual
Finite element analysis allows for
advanced loudspeaker modeling. A stereo
lithography apparatus provides tight toler-
ances.
Adding to the proud lineage of Revel’s
Ultima and Performa Series Loudspeakers,
the S12 solidifies Revel’s reputation as the
leading designer and manufacturer of
high-quality, high-performance loudspeak-
ers.
HIGHLIGHTS
• Proprietary dual 5-inch (127mm)
Organic Ceramic Composite woofers
• Proprietary dual 1-inch (25mm)
Organic Ceramic Composite dome
tweeters
• Controlled Acoustic Impedance tweeter
waveguides
• Surround Mode Configuration control
• High output with low distortion
• High-order filter network
• Gold-plated binding posts
• Advanced woofer motor structure
• Magnetic shielding
• Large voice coils for wide dynamic
range without compression
• Rear keyholes for wall mounting
• Elegant cabinet design in black or
white vinyl finishes
PRODUCT REGISTRATION
Please register the S12 within 15 days of
purchase. To do so, register online at
www.revelspeakers.com or complete and
return the included product registration
card. Retain the original, dated sales
receipt as proof of warranty coverage.
UNPACKING
The S12 requires special care and handling
during unpacking. Pay particular attention
to the precautions that appear in this sec-
tion and to other precautions that appear
throughout this owner’s manual.
When unpacking, save all packing materi-
als for possible future shipping needs. Refer
to the Obtaining Service section on page
19 for additional information.
To unpack the S12:
1. Fully open the top flaps of the packing
carton as shown in Figure 1 (page 7).
2. With the top flaps folded back, careful-
ly roll the carton over onto its exposed
top pad as shown in Figure 1 (page 7).
3. Lift the packing carton off of the loud-
speaker as shown in Figure 1 (page 7).
Use caution to avoid damaging the
cabinet. At this point, the loudspeaker
will be upside down.