Revel S12 - Manual (Page 10)

10 REVEL Concerta S12
Owner’s Manual
1
2
3
INPUT PANEL
The numbers in Figure 7 (above) correspond
with the numbered items in this section.
1. Input Connectors
Two “positive” and two “negative”
gold-plated binding posts provide for
connections from the associated power
amplifier(s). Refer to the Making
Connections section beginning on page
16 for additional information.
2. Shorting-Straps
Two gold-plated shorting-straps acco-
modate wired connections. The short-
ing-straps must be removed when a
single S12 is used as dual discrete rear
channels, or used as a side and rear
channel. Refer to the Making
Connections section beginning on page
16 for additional information.
The numbers in Figure 7 (above) correspond with the numbered items in the Input Panel section that begins below.
Figure 7: S12 Loudspeaker Rear View
3. Mounting Keyholes
For secure wall-mounting with wood
screws.
LOUDSPEAKER
PLACEMENT/MODE
CONFIGURATION
Loudspeaker fidelity depends on the following
three factors:
1. Loudspeaker accuracy
2. Loudspeaker placement
3. Loudspeaker mode configuration
Advanced Revel design features allow the
S12 to achieve exceptional acoustical
precision. Proper loudspeaker placement
and experimentation with the Surround
Mode Configuration control will have the
most significant impact on the loudspeak-
er’s performance.