Revel S12 - Manual (Page 19)

19 REVEL Concerta S12
Owner’s Manual
OPTIMIZING
PERFORMANCE
To optimize the S12 for best performance:
1. Set the Surround Mode Configuration
control to the appropriate position.
Refer to the Loudspeaker
Placement/Mode Configuration section
beginning on page 10 for information.
2. Begin playback of a familiar music or
film source.
3. Listen from the primary listening
position, increasing volume to a
comfortable level.
4. Experiment with the Surround Mode
Configuration controls (except when
each S12 is configured to function as
two independent loudspeakers) to
determine the best setting(s) for your
home theater installation, speaker
placement and listening materials.
Determine what is best for your partic-
ular system.
LOUDSPEAKER VOLUME LEVELS
High-order filters include steep cut-offs to
reduce potential damage from “out-of-
band” frequencies. Combined with carefully
selected transducers and filter network
components, this approach helps the S12
to maintain its performance under
extreme operating conditions.
However, all loudspeakers have limits
when it comes to continuous playback. To
extend these limits, avoid playback at
volume levels that distort or strain sound.
CAUTION
To avoid damage, reduce volume level
immediately if loudspeaker sound is not
clean and clear.
OBTAINING SERVICE
To obtain warranty or non-warranty serv-
ice, contact your authorized Revel dealer.
Refer to the included Revel Warranty Card
for warranty information.