English – Reloop CONTOUR CONTROLLER EDITION User Manual
Page 26

ENGLISH
26
T10
Effect parameter
can be changed quickly hereby.
dry/wet Fader
effects can be controlled via the faders.
NOtE!
In traktor LE in chained Effect mode
only the first parameter is available.
Equalizer controller
By moving the fader the equalizer‘s parame-
ters can be adjusted. The first fader from the
left controls the high frequencies, the second
fader controls the mid frequencies and the
third fader controlls the low frequencies that
are audible in the following.
T11
FX On Button
responding to the deck. (Deck A --> FX1,
Deck B --> FX2, Deck C --> FX3, Deck D
--> FX4)
T12
Effect reset Function
be reset hereby.
FX 1 On
Chained Effect Mode.
T13
Effect Button 1
1 in Advanced Effect Mode.
FX 2 On
in Chained Effect Mode.
T14
Effect Button 2
2 in Advanced Effect Mode.
FX 3 On
Chained Effect Mode.
T15
Loop Length
Turning the encoder varies a set loop‘s
length.
By pressing the encoder the Loop Acti-
ve function is activated/deactivated.
Fine pitch controller
Herewith the current deck‘s pitch fader can be
adjusted exactly.
T16
Loop Shift
By turning the encoder a set loop can
be shifted.
Simultaneously pressing and tur-
ning the encoder determines the
movement‘s range.
tempoBend control
Allows the temporary acceleration (clockwise)
or deceleration (counterclockwise) of a track.
T17
Filter
Regulates the filter effect for the active
deck. In the zero position the filter will
be deactivated automatically.
cue mix Fading
Via the Cue Mix Fader a pre-mix can be simula-
ted in your headphones. When to the right the
master signal is audible, when to the left the
cue signal is audible.
T18
pan (Balance) controller
Herewith you can adjust the volume
division for the left and right channel.
The zero position corresponds to an
equal level on both channels.
master volume
Adjusts the master volume.
T19
autoloop Function
Sets an automatic loop with the adjus-
ted loop length (-T15-), without having
to manually set the ending point.
Loop In/Set cue Button
Manually sets the starting point of a loop.
Simultaneously a cue point will be set.
T20
reloop Function
Jumps to the last set loop and reacti-
vates it.
Loop Out Button
Manually sets the ending point of a loop.
Now the deck is in a loop mode, the selected
sequence is permanentely repeated.
Pressing the button again will end the loop
mode.
T21
Beat Jump Backward
Carries out a beat jump opposed to the
playback direction.
Left-Sided GrId-Shift
Shifts the grid that Traktor puts over the bass
line a step to the left.
ELEmENt FuNctION
FuNctION wItH actIvatEd SHIFt -t29-