Photogenic Professional Lighting ION - Manual (Page 9)

9
To Remove the Battery Pack: Connecting the Monolight(s):
Ensure the Monolight and the modeling lamp are powered off. Plug the flash
units into the AC power outlets located on the panel. Power ON the inverter.
Mount the ION Multi-Clamp to the light stand.
Insert the ION Inverter so that it hangs in the ION Multi-Clamp slot. Make sure it
is securely inserted into the clamp. The supplied Multi-Clamp and strap provides
a variety of ways to mount the Photogenic ® ION Inverter.
V: APPLICATIONS AND MOUNTING
Convenient ION Multi-Clamp for
Stand Mounting
Flexible Strap Configurations for
Both Shoulder or Stand Mounting