Photogenic Professional Lighting ION - Manual (Page 5)

5
III: PREPARATION
Unpacking and Setup:
Unpack all components carefully from the cartons. Do not discard or
destroy the packing material until the equipment has been inspected,
assembled and all parts accounted for. After unpacking, all parts should
be examined for any damage which may have been caused by rough
handling during shipment. If any damage is detected, contact the deliv-
ering carrier at once. Claim for damage should be made to the delivering
carrier before destroying packing cartons.
Before using the inverter for the first time or initial charging,
1) Separate the battery pack from the inverter.
2) Remove the insulating tape from the contacts.
3) Replace the battery pack on the inverter.
It is recommended that the battery pack be charged before using
the inverter for the first time. See Charger Connector section for
instructions.