Photogenic Professional Lighting ION - Manual (Page 6)

6
IV: OPERATION / CONTROLS / INDICATORS
On / Off Button
To power the unit ON, press and hold the red power button for 2 seconds
and then release. To switch power OFF, press and hold the red power
button for 2 seconds and then release.
LED Battery Status Indicators:
The front of the inverter has 4 LEDs that indicate battery charge level.
LED Indicator Battery Capacity Remaining
Full (green) 75%-100%
3/4 (green) 50%-74%
1/2 (green) 25%-49%
1/4 (red) Below 25%
When the 1/4 LED blinks red, this indicates that the battery has less than
10% of charge remaining. The unit should be switched OFF and the
battery should be fully charged.
Power LED Indicator:
The power LED indicates the status of the inverter.
LED Indicator Inverter Status
Off Power off
Green Normal operation
Orange Inverter shutdown – USB normal
Red Inverter shutdown – No USB power
Both the inverter and battery have protection circuits that will shut the unit
down if the temperature becomes too high for safe operation. This prevents
damage and prolongs the life of your product.
If inverter shutdown occurs unplug any devices from the inverter and leave
the device in a cool place for approximately 30 minutes.