Photogenic Professional Lighting ION - Manual (Page 7)

7
USB port:
For your convenience, a 0.5A USB port has been included on the front
panel of the inverter. This port can be used for powering portable elec-
tronic devices such as certain cellular phones and mp3 players.
Be aware that some electronic accessories require more than 0.5A for
charging. These higher power devices may not charge properly using the
ION USB port.
Charger Connector:
To charge the battery while it is attached to the inverter,
1. Ensure that the inverter is switched OFF. The battery will not charge if
the inverter is ON.
2. Plug the charger’s AC power cord into a suitable AC power source.
3. Plug the charger into the inverter’s connector on the front panel.
The LED indicator on the charger will turn red while the battery is
charging and turn green to indicate that the battery is fully charged.
4. You may also charge the battery pack or a spare battery pack by plug-
ging the charger directly into the connector on the battery pack itself.
Replace the Battery Pack:
Switch the inverter power OFF and unplug the charger (if connected).
Disconnect monolights and/or any other devices connected to the
Photogenic ® ION inverter.