User function setting – Nipros HDM-70WV User Manual

Page 33

Adjustments and Settings

ユーザー設定

User Function Setting

Menu of the WAVEFORM for the UTILITY settings

VECTORSCOPE ［ON］

WAVEFORM ［ON］

RETURN

WAVEFORM ［ON］

DISP TYPE ［OVERLAY］

Y OVER LIMIT ［95.0%］

Y UNDER LIMIT ［0.0%］

RETURN

VECTORSCOPE ［ON］

DISP TYPE ［OVERLAY］

GAIN ［ 1.00］

ウェーブフォームの設定

ベクトルスコープ

1.00 to 4.98

ON or OFF

OVERLAY or OVERLAP

-7.3 to 109.1

Menu of the VECTORSCOPE for the UTILITY settings

OVERLAY

95.0%

0.0%

ON or OFF

OVERLAY or OVERLAP

OVERLAY

1.00

6-3-2

6-3-3

HD Monitor HDM-70WV

-7.3 to 109.1

［default setting］

デフォルト設定値

ベクトルスコープの設定

［default setting］

デフォルト設定値

Select the WAVEFORM display, ON or OFF.

Select the DISPLAY TYPE, OVERLAP or OVERLAY.

Select and set the upper limit and lower limit level to indicate the OVER LIMIT and UNDER LIMIT of the Y signal by

changing the graph color to RED.

Select the VECTORSCOPE display, ON or OFF.

Select the DISPLAY TYPE, OVERLAP or OVERLAY.

Select and set the GAIN to indicate the VECTORSCOPE, 1.00 to 4.98