Nipros PS-570 Operating Instruction - Manual (Page 30)

30
Setting
PS-570の前面パネルにあるスイッチをタリー選択時に点灯するように設定したいチャンネルのみONにします。
選択するCHをONにします。
Set the switch(s) to ON to light up the TALLY indicator(s) of selected channel(s).
1 Select Tally indication channels of PS-570 with TALLY SELECT switches.
Make sure the TALLY indicator lights up correctly when the corresponding tally channels of
a switcher are selected.
Now that the pre-adjustment and setting are done, ensure Camera pictures and RET
signal are displayed properly and tally indicators of PS-270 and the monitor are light up.
If it s OK, the multi-camera system is ready to start recording.
This camera adaptor system is specially designed for a SONY camcorder.
Never use a camcorder made by the other manufactures.
If you use, the system might not perform as expected or damage the camera.
NIPROS PS−570
Pre-Adjustment and Setting