Kino Flo Vista Single - Manual (Page 7)

7
Inserting Lamp
Restricting the airflow around the lamp can
cause the lamp to operate hotter.
This increased heat will raise the lamp’s color
temperature and green spike. Therefore, it is
recommended to clip the gels to the doors of
the fixture.
Do Not clip gels to the louver.
Do Not block the fixture ends in a manner
that restricts airflow.
Insert lamp at a 45° angle and align pins with
lamp holder.
Gently lay lamp down into fixture.If you feel
resistance, the lamp is not properly aligned.
Start again.
Press lamp securely into lamp clip and snap the
locking clip in place.
If the latch appears loose simply bend it to take
up the slack.
Gelling the Fixture