Glyph GT 062 3TB Addendum - Manual (Page 8)

6. Now both drives should show as Dy-
namic on the left area.
7. Next, right-click on one of the drives
where it says unallocated and chose New
Volume from the menu. The new volume
Wizard will come up, and click next.
8. In the next screen select the drive mode
you want, either Spanned or Striped
9. On the next screen, highlight the other
disk in the left hand pane, and click the
Add button to move the selected drive
over to the right hand pane. This tells
Windows which drives to add to the RAID
set. When both disks are selected, click the
next button.
10. On the next screen assign the next
available drive letter.
11. Next, format the drive with the follow-
ing settings: NTFS, Default Allocation unit
size, in the Volume Label field name your
volume, then click “Perform a quick for-
mat”.
12. The next screen is a summary. Click Fin-
ish and your drive will be formatted.
13. Finally, open My Computer and verify
that your RAID is online and Healthy.