Garden Sun Heater HSS-A-GH Standard Lift Up - Manual (Page 7)

6
Step 5 – Attach Reflector Studs to Screen Cover
.
Insert 3 Reflector Studs & 3 Flat Washers.
.
Insert the screw coupler on the pole, inserting it
through the middle of the table on the pole.
Thread the tightening spacer on the bottom of the
table counterclockwise onto the screw coupler.
Tighten securely to hold the table to the screw coupler.
Thread the fastening nut counterclockwise.
Tighten securely to lock in place.
Loosen the fastening nut to adjust the
position of the table on the pole.
Tighten studs securely.
Step 6 – Attach Head Assembly to Pole
.
Screw off 4 small bolts.
3 Req’d Reflector Studs 3 Req’d Large Flat Washers
Head Assembly
4 Req’d Small Bolts