Garden Sun Heater HSS-A-GH Standard Lift Up User Manual
Page 14
13
.
Gas odor with extreme yellow tipping of flame.
.
Heater does NOT reach the desired temperature.
.
Heater glow is excessively uneven.
.
Heater makes popping noises.
.
Spiders and insects can nest in burner or orifices.
This dangerous condition can damage heater and
render it unsafe for use. Clean burner holes by using
a heavy-duty pipe cleaner. Compressed air may help
clear away smaller particles.
.
Carbon deposits may create a fire hazard. Clean
dome and burner screen with warm soapy water if
any carbon deposits develop.
Note: In a salt-air environment (such as near an ocean),
corrosion occurs more quickly than normal. Frequently
check for corroded areas and repair them promptly.
TIP:
Use high-quality automobile wax to help maintain the
appearance of your heater. Apply to exterior surfaces from
the pole down. Do not apply to emitter screen or domes.
Storage
Between uses:
.
Turn Control Knob OFF.
.
Disconnect LP source.
.
Store heater upright in an area sheltered from direct
contact with inclement weather (such as rain, sleet,
hail, snow, dust and debris).
.
If desired, cover heater to protect exterior surfaces
and to help prevent build up in air passages.
Note: Wait until heater is cool before covering.
During periods of extended inactivity or when
transporting:
.
Turn Control Knob OFF.
.
Disconnect LP source and move to a secure,
well-ventilated location outdoors.
.
Store heater upright in an area sheltered from direct
contact with inclement weather (such as rain, sleet,
hail, snow, dust and debris).
.
If desired, cover heater to protect exterior surfaces
and to help prevent build up in air passages.
.
Never leave LP cylinder exposed to direct sunlight or
excessive heat.
Note: Wait until heater is cool before covering.
Service
Warranty
Repair to gas passages and associated components
should be done only by a qualified service person.
Caution:
Always
allow
heater
to
cool
before
attempting service.
Heater’s warranty extends for 1 years from date of
purchase by original purchaser.
Manufactured by: Jiangsu Gardensun Furnace Co., Ltd.
Xinwu Village Zouqu Town Changzhou City
Jiangsu Province P.R. China
Manufacturer will cover:
All parts found to be defective due to materials or
workmanship for 1 years from the date of original
purchase. Proof of purchase is required before warranty
performance will be rendered. Sales receipt and
validation of product registration are valid forms of proof
of purchase.
Warranty Exclusion
Manufacturer will NOT cover:
Assembly or start-up
Normal adjustment to burner
Cleaning and/or general maintenance
Legal Rights
No one else is authorized to make any warranties on behalf
of manufacturer.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY,
EXPRESS OR IMPLIED, ORAL OR WRITTEN,
INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
Manufactured by:
Jiangsu Gardensun Furnace Co., Ltd.
Xinwu Village Zouqu Town Changzhou City
Jiangsu Province P.R. China
Tel: 86-519-83317471
Fax: 86-519-83315116
Http: www.jiadeshun.com
For additional assistance or service, please call: (855)885-5858