E-flite Gypsy 370 ARF - Manual (Page 30)

❍
3. Use a ruler to adjust the throw of the elevator
and rudder. Adjust the position of the pushrod
at the control horn to achieve the flowing
measurements when moving the sticks to their
endpoints. Moving the linkage at the control
horn can increase or decrease the throw.
Moving the linkage to the top of the horn will
decrease the throw, while moving toward the
bottom of the horn will increase the throw.
Elevator: 1/2" (13mm) Up 1/2" (13mm) Down
Rudder: 5/8" (16mm) Right 5/8" (16mm) Left
30