E-flite Gypsy 370 ARF - Manual (Page 15)

❍
3. Connect the servos and battery to your radio
system as shown in the radio instructions.
Center the trim levers and turn on the radio.
This will center the servos. It is your job to
remove the servo arms and position them so
they are perpendicular to the servo.
❍
4. Locate the micro control connector and
connector backplate. Slide the connector
through the servo arm and secure its location
using the connector backplate. Prepare two
servos with the connectors opposed to each
other as shown in the photo.
15