E-flite Gypsy 370 ARF - Manual (Page 14)

Radio Installation
Required Parts
Fuselage
Micro control connector (2)
Control connector backplate (2)
Two-sided tape (2)
Required Tools and Adhesives
Phillips screwdriver
Side cutters
Servo (2)
Speed control
Receiver
Drill bit: 1/16" (1.5mm)
❍
1. Install the servo eyelets and grommets using
the instructions provided with your particular
radio system.
❍
2. Remove the covering from the front opening on
the bottom of the fuselage. This will allow
cooling air to pass through the fuselage, and
will also help when installing the servos.
14