E-flite Mini Ultra Stick ARF User Manual

Page 14

Option 2: Motor Installation Outside Fuselage



1. It may be necessary to attach motor mount

or other accessories to your particular motor
at this time.



2. Attach the Outrunner motor to the front of

the firewall using four 4-40 x 1/4" socket
head screws.

Note: The mount is attached to the front (white

side) of the firewall.

Important Information About Your Brushless ESC

Make sure your ESC brake is programmed

to Off. Also, be sure to use an ESC with the

proper 9V cutoff when using 3-cell Li-Po packs,

or 6V cutoff when using 2-cell Li-Po packs.