Landing gear installation – E-flite Mini Ultra Stick ARF User Manual

Page 10

Landing Gear Installation

Required Parts

• Fuselage

• Landing gear assembly with wheels

• 4-40 x 1/2" socket head screw (2)

• #4 washer (2)

Required Tools

• Hex wrench: 3/32"



1. Locate the landing gear assembly. Attach the

landing gear assembly to the fuselage using
two 4-40 x 1/2" socket head screws and two
#4 washers.

Note: The landing gear will only fit one

direction for the holes to line up properly. Also,

check that the wheel will rotate freely. If not,

loosen the nuts and retighten.