Watts Pump & Bilge Discharge Hose - Reels - Manual

For Commercial & Residential Applications
ES-PumpHose
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––
Pump & Bilge
Discharge Hose
This bilge and pump hose design incorporates corrugated, ultra-low den-
sity polyethylene that allows high operating temperature stability.
Attributes
• Excellent tear strength and high impact puncture resistance
• It features molded cuffs every 3' for easy use with additional fittings
Applications
• Marine applications
• Sump Pump
• Discharge operations where no vacuum is present
Operating Temperature Range . . . . . 5°F (-21°C) to 150°F (66°C)
Material . . . . . . . . . . . . . . . . Low Density Polyethylene
Color . . . . . . . . . . . . . . . . . . White
Packaging
Dispenser spools
ES-PumpHose 1012 © 2010 Watts
USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com
Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts
reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications
on Watts products previously or subsequently sold.
A Watts Water Technologies Company
Pressure Range
O.D. I.D. WALL WORKING PRESSURE
INch INch (PSI @ 70°F)
1 3/4 1/8 N/A
1-5/8 1-1/8 1/4 N/A
1-3/4 1-1/4 1/4 N/A
2 1-1/2 1/4 N/A
!
WARNING: Not intended for use with
potable water.