Watts LFWP24B - Manual

Lead Free* Brass CrimpRing ™ Test Plugs are used for pressure
testing the system. The Lead Free* Brass CrimpRing ™ Test
Plugs feature Lead Free* construction.
Specifications
System shall be plumbed using Watts WaterPEX ® cross-linked
polyethylene pipe, and all joints shall be made using Watts
Lead Free* Brass CrimpRing ™ and/or Poly-alloy CrimpRing ™
fittings using either the Watts copper CrimpRing ™ or stainless
steel CinchClamp ™ crimping methods as outlined in the Watts
Installation Guidelines. Lead Free* Brass CrimpRing ™ fittings
shall comply with state codes and standards, where applicable,
requiring reduced lead content.
Installation Note
Lead Free* Brass CrimpRing ™ Test Plugs must be installed in
accordance with all Watts installation procedures, including
information provided in installation manual and guidelines.
Approvals
• Manufactured in accordance with American Society for
Testing and Materials (ASTM International) F877 and F1807
• Listed by the NSF International to NSF Standards 14 and 61
for use in potable water systems
• Listed by NSF International to be in compliant to the Uniform
Plumbing Code
• Labeled B137.5 which indicates that it is compliant to the
CSA Standards B137.5
Note: Watts WaterPEX CinchClamp ™ fittings should not be
used with wrought copper PEX fittings.
LFWP24
CrimpRing ™ Test Plug
Lead Free * Brass
CrimpRing ™ Test Plugs
* The wetted surface of this product contacted by consumable water con-
tains less than one quarter of one percent (0.25%) of lead by weight.
For Residential and Commercial Applications
ES-WP-LFBrassTestPlugs
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––
LEAD FREE
*
ES-WP-LFBrassTestPlugs 1125 © 2011 Watts
USA: No. Andover, MA • Tel: (978) 688-1811 • Fax: (978) 794-1848 • www.watts.com
Canada: Burlington, ON • Tel: (905) 332-4090 • Fax: (905) 332-7068 • www.wattscanada.ca
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts
reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications
on Watts products previously or subsequently sold.
A Watts Water Technologies Company
Dimensions – Weights
MODEL COnnECTiOn Pkg WEighT
in. mm type lbs. kgs.
LFWP24B-06PB 3 ⁄
8
10 Crimp Fitting 1 0.4
LFWP24B-08PB 1 ⁄
2
15 Crimp Fitting 1 0.4
LFWP24B-12PB 3 ⁄
4
20 Crimp Fitting 2 0.9
LFWP24B-16PB 1 25 Crimp Fitting 2 0.9
This product is UL 1821 listed for PEX multipurpose
systems used to support NFPA 13D when used with Watts
(Residential Fire) RF PEX
TM Tubing, RF PEX TM Fittings, RF
PEX TM Sprinkler Fittings and Copper CrimpRings TM . You
must refer to Watts Residential Fire at watts.com/res-
fire for further product specification and safety informa-
tion. DO NOT USE OTHER PRODUCTS WITHOUT SUCH
DESIGNATION IN FIRE PROTECTION APPLICATIONS.