Watts ISCA-121 - Manual

ES-WD-ISCA-121 USA 1343 ISCA-121
Tag:
SPECIFICATION: Watts Drainage Products ISCA-121 Industry Standard single vertical adjustable water closet carrier
with epoxy coated cast iron fitting, 4"(102) no hub waste and 2"(51) no hub vent connections, epoxy coated cast iron
patent pending compression seal faceplate assembly, epoxy coated cast iron foot supports adjustable for standard and
wheelchair height, adjustable ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and
chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 300 lb. (136 kg.) static load.
Industry Standard
Single Vertical
Adjustable Closet Carrier
ISCA-121
Notes:
Siphon jet (4 bolt) arrangement shown. Invert faceplate
assembly for blow-out (3 bolt) bowls.
Anchor legs to concrete floor with minimum 1/2" (13) anchor
bolts (by others).
Options (Select One or More)
Suffix Description
-M1 ABS Extended Nipple (Up to 24")
-M11 Tiling Frame
-M20 Flush Valve Support
CA-100-EXT Aux. Support System w/Extended Nipple
X = 5-3/4" (146) Maximum with Standard Nipple
-HS Hub & Spigot Connections
Extra-Heavy 500lb. Carrier (ASME A112.6.1M)
with 3/4" - 10" Stainless Steel Studs
-XH
5-5/16"
(135)
6-1/2"
(165)
2-3/16" (56)
1-1/2"
(38)
2-3/32" (53)
"X"
5/16"
(8)
6-23/32"
(171)
11-1/2" (292mm) MIN 16-1/2" (419mm) MAX
-US Buy American Compliant
5" (127) MIN.
9" (229) MAX.
9" (229)
15" (381)
7-1/2"
(191)
4-7/8" (124)
MIN.
9-1/2" (241)
MAX.
17-3/4"
(451)