Watts 4515RB User Manual
Series 45, Brass quick-connect connectors, For residential and commercial applications
Series 45
Brass Quick-Connect Connectors
Sizes:
1
⁄
2
" - 1" (15 - 25mm)
Watts Series 45 Quick-Connect fittings are designed and man-
ufactured for many years of trouble free service. Series 45 fit-
tings are manufactured from brass and incorporate the proven
Watts Quick-Connect patented (7,354,079 B2) O-ring and
Collet design which allows for quick and easy connections
without the use of installation or disconnection tools.
Specifications
Connection shall be made using Watts Series 45 Brass
Quick-Connect fittings with integral Collet and O-ring guide.
Fitting shall be able to fully rotate under pressure and allow for
easy disconnect and reuse without tools.
Approvals
ASSE 1061-2006, NSF/ANSI 14, NSF/ANSI 61
CSA B137.5, ASTM F877
Ratings
80psi @ 240°F (5.2 bar @ 116°C)
250psi @ 75°F (17.3 bar @ 24°C)
Notes
For compliance to ASSE 1061 a pipe insert (provided) must be
used with each connection when joining PEX pipe.
A collet cover is provided for each CTS connection and is
intended to prevent accidental disconnection of fitting during
pull-through installations while the system is unpressurized. To
disconnect the fitting, manually remove the collet cover and
depress the collet.
For Residential and Commercial Applications
ES-QC-45Connectors
Job Name –––––––––––––––––––––––––––––––––––––––––––
Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location –––––––––––––––––––––––––––––––––––––––––
Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer –––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No. –––––––––––––––––––––––––––––––––––
Approval –––––––––––––––––––––––––––––––––––––––––––––
Representative ––––––––––––––––––––––––––––––––––––––––
4510B
4501B
4515B
4515RB
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with-
out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
C
US
ES-QC-45Connectors.qxd 3/25/09 9:59 AM Page 1