Watts FM-BB-20-5 - Manual (Page 7)

Flow-Max ®
Phenolic Impregnated Cellulose Cartridges
For Industrial Hot Water & Non-Aqueous Applications
Jumbo Model 170 (7-3/4” x 30-3/4”) for flow rates to 150 GPM
Part Number Model Number Length Micron No. / case
FMPIC-170-5-HT 170 30-3/4” 5 1
FMPIC-170-20-HT 170 30-3/4” 20 1
FMPIC-170-50-HT 170 30-3/4” 50 1
Jumbo Model 90 (7-3/4” x 19-1/2”) for flow rates to 100 GPM
Part Number Model Number Length Micron No. / case
FMPIC-90-5-HT 90 19-1/2” 5 1
FMPIC-90-20-HT 90 19-1/2” 20 1
FMPIC-90-50-HT 90 19-1/2” 50 1
Applications
• High temperature industrial water filtration
• Lubricating oil
• Cutting fluids
• Solvents
• Distillate fuel
• Fuel oil
• Hydraulic fluids
Specifications Data
Maximum temperature 250˚F (121˚C)
Minimum temperature -20˚F (-29˚C)
Maximum pressure 70 PSID (482 k PA)
Recommended change out 25 PSID (172 k PA)
Media Phenolic impregnated cellulose
End caps, cores, outer body Electro plated tin
Jumbo Model 40 (7-3/4” x 9-5/8”) for flow rates to 50 GPM
Part Number Model Number Length Micron No. / case
FMPIC-40-5-HT 40 9-5/8” 5 1
FMPIC-40-20-HT 40 9-5/8” 20 1
FMPIC-40-50-HT 40 9-5/8” 50 1
Note: Jumbo 40. 90 and 170 cartridges listed above fit in Flow-Max housings only. Phenolic impregnated
cellulose cartridges are not cleanable or reusable; and they are not suitable for potable water.