Watts ISCA-131-L/R/2 - Manual

ES-WD-ISCA-131-LR-2 USA 1344 ISCA-131-L/R/2
Tag:
SPECIFICATION: Watts Drainage ISCA-131-L/R Industry Standard single vertical adjustable water closet carrier with epoxy
coated cast iron fitting, 4"(102) no hub waste and 2"(51) no hub vent connections, 4"(102) no hub side inlet(s), epoxy
coated cast iron patent pending compression seal faceplate assembly, epoxy coated cast iron foot supports reversible inlet
cap, adjustable for standard and wheelchair height, adjustable ABS nipple with integral test cap and neoprene bowl gasket,
plated hardware and chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 300 lb. (136 kg.)
static load.
Industry Standard
Single Vertical Adjustable
Closet Carrier w/Side Inlet(s)
ISCA-131-L/R/2
X = 5-3/4" (146) Maximum with Standard Nipple
NO HUB FITTING
FACEPLATE
ASSEMBLY
W/COMPRESSION
SEAL
REMOVABLE LUGS
FOR SHALLOW ROUGH-IN
DUAL SLOTTED
LEGS
5" (127) MIN.
9" (229) MAX.
9" (229)
15" (381)
7-1/2"
(191)
4-1/2" MIN.
(114 MIN.)
9-1/2" MAX.
(241 MAX.)
17-3/4"
(451)
1-3/4" (44) MIN.
5-3/4" (146) MAX.
12-1/2"
(318)
5-5/16"
(135mm)
11-1/2" (292mm) MIN 16-1/2" (419mm) MAX.
6-1/2"
(165mm)
2-
3/
16" (56mm)
1-1/2"
(38mm)
2-3/32" (76mm)
"X"
5/16"
(8mm)
5"
(127mm)
3-1/2"
(89mm)
2"
(51mm)
ABS NIPPLE
W/INTEGRAL
TEST CAP
ASTM C564
COMPRESSION
GASKET
REVERSIBLE
INLET CAP
Note: Extended nipple (-M1) option cannot be used with –XH carriers.
Notes:
Siphon jet (4 bolt) arrangement shown. Invert faceplate
assembly for blow-out (3 bolt) bowls.
Anchor legs to concrete floor with minimum 1/2" anchor
bolts (by others).
For –XH option, rear anchor support must be used.
Options (Select One or More)
Suffix Description
-M1 ABS Extended Nipple (Up to 24")
-M11 Tiling Frame
-M20 Flush Valve Support
-36 36" Long Barrel Fitting
CA-100-EXT Aux. Support System w/Extended Nipple
-HS Hub & Spigot Connections
-XH Extra Heavy 500lbs. Carrier
(ASME A112.6.1M) with 3/4”-10
Stainless Steel Studs
-US Buy American Compliant