Watts C-FBV-1 - Manual

For Commercial and Industrial Applications
ES-C-FBV-1
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––
Series C-FBV-1
2-Piece, Full Port, Carbon Steel
Ball Valves
Sizes: 1 ⁄
4
" – 3" (8 – 80mm)
Series C-FBV-1 2-Piece, Full Port, Carbon Steel Ball Valves are
suitable for a full range of liquids and gases. The C-FBV-1’s full
port orifice ensures maximum flow capacity, while reinforced
PTFE seats, PTFE stem packing, thrust washer and body
seal provide maximum safety and high operating
pressure/temperature limits.
Features
• Full port design
• Pressure rated at 1000psi (70 bar) WOG non-shock
and 125psi (8.6 bar) WSP
• Adjustable stem packing
• Bottom loaded, blowout proof stem
• Drilled and tapped mounting pads
• PTFE stem packing, thrust washer and body seal
• Reinforced PTFE seat
• Vinyl insulator on heavy duty 304SS handles
• Low operating torque
• Each valve factory tested
• Standard Latch-Lok handle to lock in open or close position
• Conforms to MSS-SP-110 and API-598
Specifications
A 2-piece full port carbon steel ball valve to be installed as
indicated on the plans. The valve must have an adjustable
stem packing, reinforced PTFE seats, PTFE stem packing,
thrust washer and body seal. Pressure rating no less than
1000psi (70 bars) WOG non-shock, 125psi (8.6 bars) WSP.
Valve must conform to MSS-SP-110. Valve shall be
a Watts Series C-FBV-1.
C-FBV-1
Pressure – Temperature
Temperature Range: 0 ° F - 400 ° F (-18 ° C – 204 ° C)
Maximum Working Pressure: 1000psi (70 bar) WOG
non-shock; 125psi (8.6 bar) WSP
USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com
Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts
reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications
on Watts products previously or subsequently sold.
A Watts Water Technologies Company
LEAD FREE
*
*The wetted surface of this product contacted by consumable
water contains less than one quarter of one percent (0.25%) of
lead by weight.