Watts 3521B - Manual

Series 35
Quick-Connect
Elbows
Watts Quick-Connect Elbows are designed and manufactured
for many years of trouble free service. Produced of off white
Polysulfone, a high performance thermal plastic material, the
Watts Quick-Connect design allows for quick and easy con-
nections without the use of installation tools.
Specifications
Connection shall be made using Watts Series 35
Quick-Connect fitting with Integral Collet and O-Ring guide.
Fitting shall be able to fully rotate under pressure and allow for
easy disconnect and reuse without the use of disconnection
tools. Fitting must not disassemble to disconnect.
Approvals
NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, ASSE 1061
Ratings
100psi @ 180°F (6.8 bar @ 82°C)
250psi @ 75°F (17.3 bar @ 24°C)
Example
3512-1008
35 = Series 35
12 = Type 12 Stackable Hose Barb Elbow
1008 = 1 ⁄
2
" CTS x 1 ⁄
2
" Barb
Dimensions – Weights
Weight and Dimensions are approximate (tolerance +/- 1/8)
For Residential and Commercial Applications
ES-QC-35Elbows
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––
3512 3517
3518
3521
3519 3520
A
B
Type 12 Stackable Hose Barb Elbows
MODEL SizE & CONNECTiON iTEM LENGTH iTEM HEiGHT iTEM WEiGHT
A B
in. mm in. mm lbs. kg.
Package Type: Bulk
3512-1008
1 ⁄
2
" CTS x 1 ⁄
2
"Barb 1 1 ⁄
2
38 2 1 ⁄
8
54 0.3 .14
Package Type: Poly Bag
3512B-1008
1 ⁄
2
" CTS x 1 ⁄
2
"Barb 1 1 ⁄
2
38 2 1 ⁄
8
54 0.3 .14
Caution: The polysulfone material used in the Quick-Connect fittings can
be compromised by exposure to volatile organic compounds (VOC’s) and
caustic chemicals. Therefore, DO NOT expose this product to any such
chemical or foreign substance, which would include exposure to the fol-
lowing products: Pipe Dopes (thread sealants), bug sprays, lubricants,
cleaners, paints, bleaches, acids, solder fluxes, plastic piping primers and
cements, oxidizing agents, alkaline solutions, thinners, fuels, oil based
caulks, hydrocarbons, spray foam of foaming agents (insulation).
It is also recommended that all threaded connections be made with
Teflon ® tape only.
USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com
Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference
only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or
modify product design, construction, specifications, or materials without prior notice and without incurring any
obligation to make such changes and modifications on Watts products previously or subsequently sold.
A Watts Water Technologies Company
LEAD FREE
*
* The wetted surface of this product contacted by consumable
water contains less than one quarter of one percent (0.25%) of
lead by weight.