Watts FS-CFC-S - Manual

For Residential and Commercial Applications
ES-FS-CFC-S
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. –––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––
Series FS-CFC-S
FloodSafe
®
Braided Stainless Steel
Faucet Connectors
Series FS-CFC-S FloodSafe ® Braided Stainless Steel Faucet
Connectors are designed for use in residential & commercial
applications, specifically for hookups to the faucet water supply.
They include a patented FloodSafe
® shutoff device on the inlet
side to protect against catastrophic water damage. There are
no mechanical moving parts during normal operation and no
power source is required. FloodSafe
® connectors consist of
PVC tubing jacketed with braided stainless steel and require no
tube cutting, bending, or soldering during installation. Various
end connections are available.
Features
• Available in 12", 16" and 20" (305, 406 and 508mm) lengths
• NSF & IAPMO Listed
• Only economical and secure safeguard against catastrophic
water damage available on the market
• U.S. Patent No. 7,111,638
• No mechanical moving parts during normal operation,
ensuring years of maintenance free operation
• Does not require electricity, batteries or any other source of
power
• Installs between the stop valve and the fixture/appliance with
the FloodSafe ® device located at the stop valve
• Acts as a water conservation device, by shutting off the
water to the faucet when the mandated flow restrictor is
removed
• FloodSafe ® connectors can be easily reset if water flow has
been stopped
Specifications
A braided stainless steel faucet connector shall be installed as
indicated on the plans. The connector shall have a patented
FloodSafe
® shutoff device on the inlet side. The connector shall
be pressure rated to 125psi (8.75 bar) and be NSF & IAPMO
listed. Connector shall be a Watts Regulator Company Series
FS-CFC-S.
Compression
end
Compression
end
3 ⁄ 8 " ----------------------- 12", 16", 20" ---------------------- 3 ⁄ 8 "
C C
Compression
end
Female iron pipe
(FIP) end
1 ⁄
2
" ----------------------- 12", 16", 20" ---------------------- 1 ⁄
2
"
3 ⁄
8
" ----------------------- 12", 16", 20" ---------------------- 1 ⁄
2
"
7 ⁄
16
" ---------------------- 12", 16", 20" ---------------------- 1 ⁄
2
"
C F
Female iron pipe
(FIP) end
Female iron pipe
(FIP) end
1 ⁄ 2 " ----------------------- 12", 16", 20" ---------------------- 1 ⁄ 2 "
F F
Fine thread
female end
Female iron pipe
(FIP) end
1 ⁄ 2 " ----------------------- 12", 16", 20" ---------------------- 1 ⁄ 2 "
3 ⁄ 8 " ----------------------- 12", 16", 20" ---------------------- 1 ⁄ 2 "
T F
Compression
end
OD compression
end
3 ⁄ 8 " ------------------------- 12", 20" ------------------------ 3 ⁄ 8 "
C O
“Delta Style”
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with-
out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.