Watts BP30 - Manual

For Commercial and Residential Applications
ES-BP30
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. –––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––
IMPORTANT: INQUIRE WITH GOVERNING AUTHORITIES
FOR LOCAL INSTALLATION REQUIREMENTS
Series BP30
Diaphragm Operated By-Pass
Control Relief Valves
Size: 1 ⁄
2
" (15mm)
Series BP30 Diaphragm Operated By-Pass Relief Valves
regulate liquid pressure as supplied by a positive pressure
pump. These relief valves protect equipment by opening at
desired setting and allowing excess volume to be bypassed
back to source. They feature bronze body construction,
sensitive rubber diaphragms, and Buna-N discs.
The tee handle facilitates pressure change. The spring and
adjustment handle are free from contact with liquid elements
being controlled. The maximum temperature for this series
is 180°F (82°C).
Features
• Rugged bronze body
• Sensitive rubber diaphragm
• Tee handle
• Spring and adjustment handle separated
from liquid elements
Pressure Ranges
Maximum Temperature 180°F (82°C)
BP30 - Adjustable Opening Range 10-50psi (.1-3.4 bar)
BP30 - Adjustable Opening Range 45-100psi (3.1-6.9 bar)
BP30 - Adjustable Opening Range 75-175psi (5.2-12.1 bar)
Materials
Body: Bronze
Diaphragm: Buna-N
Disc: Buna-N
BP30
The Watts products listed on this page are small type relief valves.
Construction of these products does not meet the (ANSI Z21.22)
nationally recognized applicable standard.
SIZE (DN) HEIGHT LENGTH WEIGHT
Model in. mm in. mm in. mm lbs. kg.
BP30 1 ⁄ 2 15 5 3 ⁄ 4 146 2 1 ⁄ 4 57 1 1 ⁄ 8 .5
Dimensions
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without
prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
ES-BP30 0813 ©Watts Regulator Company, 2008
USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com
Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca W a t e r S a f e t y & F l o w C o n t r o l P r o d u c t s