Watts LFB894 012C User Manual
Lfbasin supply kits, Lead free, For commercial & residential applications
For Commercial & Residential Applications
ES-WBT-LFBasinSupplyKits
LFBasin Supply Kits
Basin Supply Kits with Angle Valve
Model
✓
to SuBMit
Supply Stop
BASin tuBe
eScutcheon
FiniSh
Basin Supply Kits with Angle Valve
LFB889012C
3
/
8
" IPS - Angle
3
/
8
" x 12" long
3
/
8
" IPS Sure Grip
Chrome
LFB892012K
1
/
2
" Copper Solder - Angle - Loose Key
3
/
8
" x 12" long
1
/
2
" OD Sure Grip
Chrome
LFB894012C
5
/
8
" OD Comp - Angle
3
/
8
" x 12" long
5
/
8
" OD Sure Grip
Chrome
ES-WBT-LFBasinSupplyKits 1326
© 2013 Watts
USA: Tel: (978) 688-1811 • Fax: (978) 794-1848 • www.watts.com
Canada: Tel: (905) 332-4090 • Fax: (905) 332-7068 • www.watts.ca
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts
reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications
on Watts products previously or subsequently sold.
A Watts Water Technologies Company
LEAD FREE
*
Job Name –––––––––––––––––––––––––––––––––––––––––––
Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location –––––––––––––––––––––––––––––––––––––––––
Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer –––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Approval –––––––––––––––––––––––––––––––––––––––––––––
Representative ––––––––––––––––––––––––––––––––––––––––
Approvals
The Lead Free* Basin Supply Kits are constructed to
comply with Lead Free* installation requirements.
Features
• Multi-Turn Stops
• Supplied with two of each item listed
• Valve Certified to NSF/ANSI 61 Section 9-G
• IAPMO Listed
• Lead Free* Brass
Pressure and Temperature
Maximum Pressure: 125psi / 8.6 bar
Maximum Temp: 160°F / 71.1°C
LEAD
FREE
*
* The wetted surface of this product contacted by consumable
water contains less than 0.25% of lead by weight.