Watts LFCIC-P User Manual
Series lfcic-p, Lead free, For commercial and residential applications
For Commercial and Residential Applications
ES-LFCIC-P
Job Name –––––––––––––––––––––––––––––––––––––––––––
Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location –––––––––––––––––––––––––––––––––––––––––
Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer –––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No. –––––––––––––––––––––––––––––––––––
Approval –––––––––––––––––––––––––––––––––––––––––––––
Representative ––––––––––––––––––––––––––––––––––––––––
Models
LFCIC-P - All models are supplied with solid brass compres-
sion end fittings.
Series LFCIC-P
Flexible Reinforced PVC Water
Supply Connectors for Ice Makers
Sizes:
1
⁄
4
" (8mm)
Series LFCIC-P Flexible Reinforced PVC Water Supply Connec-
tors for Ice Makers are used in residential and commercial ap-
plications, specifically for hookups to the icemaker water supply
on refrigerators. These connectors provide protection from vibra-
tion and bursting under extreme pressure surges. Their flexibility
also facilitates the moving of a refrigerator without danger or
permanent damage from kinked copper tubing. Series LFCIC-P
consists of PVC tubing jacketed with polyester knitted nylon,
protective PVC outer layer, and permanently attached, brass,
compression end fittings. The LFCIC-P features Lead Free*
construction to comply with Lead Free* installation requirements.
Features
• Available in lengths: 6ft, 10ft, or 20ft
(1800, 3100, or 7000mm)
• Tubing
– PVC
– Polyester knitted nylon jacket
– Protective PVC outer layer
• Brass compression end fittings and barbs
• Convenient for difficult installations
Approvals
• Hoses are NSF 61 approved for safer drinking water
Standards
NSF and UPC Listed
Pressure-Temperature
Maximum Working Pressure: 125psi (8.6 bar)
Maximum Temperature: 140°F (60°C)
Note:
National residential plumbing codes reference the maximum
operating temperature as 140°F (60°C). Plumbing fixtures are de-
signed to ANSI—ASME A112 18.1 at 125psi.
Product
IndIvIdual
no.
SIze
Wgt. (lbS.)
LFCIC-P
1
⁄
4
" x
1
⁄
4
" x 6'
0.80
LFCIC-P
1
⁄
4
" x
1
⁄
4
" x 10'
1.40
LFCIC-P
1
⁄
4
" x
1
⁄
4
" x 20'
2.50
3
⁄
8
" 10'
3
⁄
8
"
1
⁄
4
" 6', 10', 20'
1
⁄
4
"
compression
end
compression
end
Dimensions
lFcIc-P-cc
Materials
Tubing:
Body:
PVC
Jacket:
PVC
Fittings:
Brass
LEAD FREE
*
*The wetted surface of this product contacted by consumable
water contains less than 0.25% of lead by weight.
ES-LFCIC-P 1313
© 2013 Watts
USA: Tel: (978) 688-1811 • Fax: (978) 794-1848 • www.watts.com
Canada: Tel: (905) 332-4090 • Fax: (905) 332-7068 • www.watts.ca
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts
reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications
on Watts products previously or subsequently sold.
A Watts Water Technologies Company