Watts TR19P1 IPS Elbows - Manual

For Residential and Commercial Polyethylene Pipe Applications
ES-TR19P1-ELBOWS
Job Name –––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location –––––––––––––––––––––––––––––––––––––––––– Approval ––––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. –––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative –––––––––––––––––––––––––––––––––––––––––
Series TR19P1
TRITON ™ Elbow Fittings
Sizes: 3 ⁄
4
" – 2" (20 – 50mm)
TRITON Series TR19P1 elbows are used to transition two
pieces of polyethylene pipe at a 90° angle. The fittings are
manufactured of PE 4710 and are compatible with most
polyethylene piping materials. (Consult ES-TRPE-Comp for
compatibility information.) The fittings are designed to be used
with the TRITON TRCU1 Control Unit and TRFWP1 Fusers to
complete the connection.
Specifications
The system shall be plumbed using Watts TRITON Pipe Fusion
fittings. Each fitting will incorporate the patent-pending TRITON
Fuse-Tel™ fusion indicator that will provide a visual and tactile
indication that the weld has been successfully completed. The
TRITON Pipe Fusion system will operate on 110/115 VAC
power and utilize a 13.56MHz ISM band frequency in conjunc-
tion with a dual susceptor embedded in the fitting to complete
the fuse.
TR19P1
Dimensions — Weights
Installation Notes
• Fitting and pipe must be free of grease, oils, water, and debris.
Wipe each fitting and pipe end before insertion of pipe into fitting.
• Pipe must be inserted to the correct depth "B" inside the fitting.
Use the depth gauge on the side of the fitting to properly mark
the required insertion depth on the pipe.
Standards
Manufactured in accordance with American Society
for Testing and Materials
ES-TR19P1-ELBOWS 1308 © 2013 Watts
USA: Tel: (978) 688-1811 • Fax: (978) 794-1848 • www.watts.com
Canada: Tel: (905) 332-4090 • Fax: (905) 332-7068 • www.watts.ca
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts
reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications
on Watts products previously or subsequently sold.
A Watts Water Technologies Company
TM
A
B
C
MODEL inLEt OUtLEt DiMEnSiOnS WEight
SIZE (DN) SIZE (DN) A B C
in. mm type in. mm type in. mm in. mm in. mm lbs. kgs.
TR19P1-1212-IPS 3 /
4
20 IPS 3 /
4
20 IPS 3 11 /
16
93 2 1 /
4
57 1 11 /
16
42 0.15 0.067
TR19P1-1616-IPS 1 25 IPS 1 25 IPS 4 101 2 1 /
4
57 2 51 0.22 0.099
TR19P1-2020-IPS 1 1 /
4
32 IPS 1 1 /
4
32 IPS 4 5 /
16
110 2 1 /
4
57 2 3 /
8
60 0.29 0.132
TR19P1-2424-IPS 1 1 /
2
40 IPS 1 1 /
2
40 IPS 5 3 /
16
132 2 13 /
16
71 2 11 /
16
69 0.45 0.205
TR19P1-3232-IPS 2 50 IPS 2 50 IPS 5 3 /
4
146 2 13 /
16
71 3 5 /
16
85 0.70 0.319