Watts ISCA-101-L/R-AUX - Manual

ES-WD-ISCA-101-LR-AUX USA 1343 ISCA-101-L/R-AUX
Tag:
SPECIFICATION: Watts Drainage Products ISCA-101-L/R-AUX Industry Standard single horizontal adjustable water closet
carrier with epoxy coated cast iron fitting, 4"(102) no hub waste and 2"(51) no hub vent connections, 2" 1/8 bend auxillary
inlet, epoxy coated cast iron patent pending compression seal faceplate assembly, epoxy coated cast iron foot supports
adjustable for standard and wheelchair height, adjustable ABS nipple with integral test cap and neoprene bowl gasket,
plated hardware and chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 300 lb. (136 kg.)
static load.
Industry Standard Single
Horizontal Adjustable Closet
Carrier w/Aux Inlet
ISCA-101-L/R-AUX
Notes:
Siphon jet (4 bolt) arrangement shown. Invert faceplate
assembly for blow-out (3 bolt) bowls.
Anchor legs to concrete floor with minimum 1/2" (13) lag
bolts (by others).
X = 5-3/4" (146) Maximum with Standard Nipple
2-3/4" (70) 6" (152)
10-1/4" (260)
1" (25)
2-3/16" (56)
5-5/16"
(135)
2-3/32" (53)
"X"
5/16" (8)
Note:
Left hand carrier shown; right hand carrier is mirror image.
0" MIN. 4" (102) MAX.
9" (229)
15" (381)
7-1/2" (191)
4-7/8" (124)
MIN.
9-1/2" (241)
MAX.
17-3/4" (451)
Options (Select One or More)
Suffix Description
-M1 ABS Extended Nipple (Up to 24")
-M11 Tiling Frame
-M20 Flush Valve Support
CA-100-EXT Aux. Support System w/Extended Nipple
-HS Hub & Spigot Connections
Extra-Heavy 500lb. Carrier (ASME A112.6.1M)
with 3/4" - 10" Stainless Steel Studs
-XH