Watts ISCA-141 - Manual

ES-WD-ISCA-141 USA 1405 ISCA-141
Tag:
ISCA-141 Industry Standard Vertical
Thin Wall Closet Carrier
SPECIFICATION: Watts Drainage ISCA-141 Industry Standard single vertical thin wall water closet carrier with epoxy coated
cast iron fitting, no hub waste and vent connections (specify size) epoxy coated cast iron patented compression seal faceplate
assembly, epoxy coated cast iron foot supports adjustable for standard and wheelchair height, adjustable ABS nipple with
integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts. Carrier complies with requirements of
ASME A112.6.1M up to a 300 lb. (136 kg.) static load.
Notes:
Anchor legs to concrete floor with minimum 1/2" (13) anchor
bolts (by others).
X = 5-3/4" (146) Maximum with Standard Nipple
Options (Select One or More)
Suffix Description
-M1 ABS Extended Nipple (Up to 24")
-M11 Tiling Frame
-M20 Flush Valve Support
-M23 2 "(51) RH Auxiliary Inlet
-M24 2 "(51) LH Auxiliary Inlet
-3 3 "(76) NH Waste, 2" (51) NH Vent
-4-V2 4 "(102) NH Waste, 2" (51) NH Vent
-4-V4 4 "(102) NH Waste, 4" (102) NH Vent
-US Buy American Compliant
with 3/4”-10” Stainless Steel Studs
-XH Extra-Heavy 500lb. Carrier
(ASME A112.6.1M)
9"
(229)
7-1/2"
(191)
17-3/4"
(451)
4-1/2" (114)
MIN
9-1/2" (241)
MAX
15"
(381)
1" (25)
MIN
3" (76)
MAX
4"(102) Fitting = 2-11/16” (68)
3“ (76) Fitting = 2-3/16” (56)
1-1/2"
(38)
2-3/32" (53)
9" (229)*
MIN
14" (356)
MAX
5/16"
(8)
x"
5" (127)
*8 1/2” (216) MIN. With 3” Waste