Installation continued – Watts L111 User Manual

Page 2

Watts product specifications in U.S. customary units and metric are approximate and are pro-

vided for reference only. For precise measurements, please contact Watts Technical Service.

Watts reserves the right to change or modify product design, construction, specifications, or

materials without prior notice and without incurring any obligation to make such changes and

modifications on Watts products previously or subsequently sold.

C. Temperature Adjustment
1. Open hot and cold water supply valves.
2. Open mixed water outlet.
3. With the fixture in the full open position, calibrate the

mixed water outlet temperature by placing a thermom-
eter in the mixed water stream. Adjust the setting of the
L111 valve to obtain the desired temperature (coun-
ter- clockwise, to increase temperature – clockwise to
decrease temperature).

D. Secure Setting
1. Reinstall the tamper-proof cover and secure it with the

cover screw and Allen wrench supplied.

E. Periodic Inspection/Maintenance
This valve requires periodic inspection and verification of
the outlet temperature by a licensed contractor. Corrosive
water conditions, hot feed water temperatures over 200°F
(93°C), unauthorized adjustments or repair could render
the valve ineffective for its intended service. Regular clean-
ing and checking of thermostat assembly helps to maxi-
mize valve life and mixing function. Frequency of cleaning
depends on local water conditions.

Installation continued

Mix

Inset “A”

ASSE 1070 Application

ASSE 1069 Application

Mixed

Hot

Cold

L111

Inset “B”

Two Handle Faucet

Pre-Tempered Showers

IS-L111 1008

EDP# 1911289

USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com

Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca

Limited Warranty: Watts Regulator Co. (the “Company”) warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of

original shipment. In the event of such defects within the warranty period, the Company will, at its option, replace or recondition the product without charge.

THE WARRANTY SET FORTH HEREIN IS GIVEN EXPRESSLY AND IS THE ONLY WARRANTY GIVEN BY THE COMPANY WITH RESPECT TO THE PRODUCT. THE COMPANY MAKES NO OTHER WARRANTIES,

EXPRESS OR IMPLIED. THE COMPANY HEREBY SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES

OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

The remedy described in the first paragraph of this warranty shall constitute the sole and exclusive remedy for breach of warranty, and the Company shall not be responsible for any incidental, special

or consequential damages, including without limitation, lost profits or the cost of repairing or replacing other property which is damaged if this product does not work properly, other costs resulting from

labor charges, delays, vandalism, negligence, fouling caused by foreign material, damage from adverse water conditions, chemical, or any other circumstances over which the Company has no control.

This warranty shall be invalidated by any abuse, misuse, misapplication, improper installation or improper maintenance or alteration of the product.

Some States do not allow limitations on how long an implied warranty lasts, and some States do not allow the exclusion or limitation of incidental or consequential damages. Therefore the above

limitations may not apply to you. This Limited Warranty gives you specific legal rights, and you may have other rights that vary from State to State. You should consult applicable state laws to

determine your rights.

SO FAR AS IS CONSISTENT WITH APPLICABLE STATE LAW, ANY IMPLIED WARRANTIES THAT MAY NOT BE DISCLAIMED, INCLUDING THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO ONE YEAR FROM THE DATE OF ORIGINAL SHIPMENT.

A Watts Water Technologies Company