Watts FMPS7X4 - Manual (Page 2)

Flow-Max ® Filter Housings & Cartridges
Provide High Performance and Reduce Filtration Costs
Check out these many features and benefits:
Specifications
Models
Material: Multi-cartridge and Jumbo filter housings are constructed using stainless steel.
Pressure rating: Housings are rated for pressures to 150 psi (10 bar). 300 psi pressure rating is available.
Temperature: Filters are rated for temperatures to 250° F (121° C). Please consider cartridges to be used.
Gaskets & seals: Buna-N is standard. Viton, EDPM and Teflon are available.
Finish: Protective poly-coat over stainless is standard finish. Electro-polishing available.
Pressure drop: Initial pressure drop is <1 psi at designed flow rates for housings only.
Cartridge types: Housings are designed to accept DOE cartridges. Adapters for 222 & 226 cartridges available.
4 & 5 round models 7 round 12 round 22 round Premium Series
• 100% stainless steel
for durability.
• All stainless
steel construction.
• Convenient band
clamp lid closure
is standard for easy
cartridge replacement.
• Pipe fittings are
readily accessible
for easy installation.
• Adjustable top plate
accepts variable
length cartridges
for more options.
• Two drains provided
for clean and dirty
fluids.
• Legs and mounting
tabs are available.
• Knife edge seals are provided
at both ends of all DOE
cartridges for superior
performance.
• Rated for temperatures to 250° F.
(No plastic holding rods.)
• Pressure rating to 150 psi.
• Housings for pressures to 300
psi are available.
• Optional sanitary connections.
• Models to accept DOE, 222 and
cartridges with 226 end caps.
• Protective poly-coat over
stainless steel standard finish.
• Electo-polishing is available.
• Standard, Premium Series and
Jumbo models are in stock for
immediate shipment.