Watts LFFBV-3C-QC - Manual

For Residential and Commercial Applications
ES-LFFBV-3C-QC
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––
LFFBV-3C-QC
Series LFFBV-3C-QC
2 Piece, Full-Port, Brass Ball
Valves with Watts Quick-Connect
Technology
Sizes: ½" – 1"
Series LFFBV-3C-QC 2-piece, Full-Port Lead Free* copper
silicon alloy Quick-Connect Ball Valves are ideal for use in
residential and commercial potable water applications. They
feature a bottom-loaded blowout proof stem, virgin PTFE seats,
thrust washer, and adjustable packing gland, stem packing nut,
chrome-plated Lead Free* brass ball, Lead Free* copper silicon
alloy adapter, and steel handle. The LFFBV-3C-QC features
Lead Free* construction to comply with Lead Free* installation
requirements.
Features
• Lead Free* copper silicon alloy body
• Watts integral Quick-Connect inlet and outlet connections
• Can be used with Copper, CPVC, PEX and PB pipe
• Approved to ASSE 1061
• Comes with pipe stiffeners for use with PEX
• Adjustable stem packing gland
• Virgin PTFE stem packing seal, thrust washer, and seats
• No thread sealants, solders or glues needed
• Can be rotated under pressure
• Bottom loaded blowout proof stem
• Can be removed and reused without the use of tools
Pressure – Temperature
Temperature Range: -40°F to 180°F (-40°C to 82°C)
Pressure Rating:
200psi @ 180°F (13.8 bar @ 82°C)
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with-
out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
LEAD FREE
*
*The wetted surface of this product contacted by consumable
water contains less than 0.25% of lead by weight.
Approvals
Specifications
Approved valves shall be 2-piece full-port design with integral
Watts Quick-Connect inlet and outlet, requiring no tools, thread
sealant or solder for installation and/or removal. Lead Free* 2
piece, full-port, copper silicon alloy ball valves with Watts Quick-
Connect technology shall be constructed using Lead Free*
materials. Lead Free* valve shall comply with state codes and
standards, where applicable, requiring reduced lead content.
Valve will be constructed of a forged Lead Free* copper silicon
alloy body and end adapter. Seats and stem packing will be vir-
gin PTFE. Stem shall be bottom loaded and blowout proof. Ball
shall be chrome plated with an adjustable packing gland. Valve
must be approved to ASSE-1061 for use with Copper, CPVC,
PEX and PB pipe.