Watts LF007 - Manual

For Non-Health Hazard Applications
ES-LF007
Now Available
WattsBox Insulated Enclosures.
For more information, send for literature ES-WB.
Series LF007
Double Check Valve Assemblies
Sizes: 1 ⁄
2
" – 3" (15 – 80mm)
Series LF007 Double Check Valve Assemblies shall be installed at
referenced cross-connections to prevent the backflow of polluted
water into the potable water supply. Only those cross-connections
identified by local inspection authorities as non-health hazard shall
be allowed the use of an approved double check valve assembly.
The LF007 features Lead Free* construction to comply with Lead
Free* installation requirements.
Check with local authority having jurisdiction regarding vertical orien-
tation, frequency of testing or other installation requirements.
The valve shall meet the requirements of ASSE Std. 1015 and
AWWA Std. C510. Approved by the Foundation for Cross-
Connection Control and Hydraulic Research at the University
of Southern California.
Features
• Ease of maintenance — only one cover
• Top entry
• Replaceable seats and seat discs
• Modular construction
• Compact design
• Lead Free* cast copper silicon alloy body construction —
1 ⁄
2
" – 2" (15 – 50mm)
• Fused epoxy coated cast iron body — 2 1 ⁄
2
" – 3" (65 – 80mm)
• Top mounted Lead Free* ball valve test cocks
• Low pressure drop
• No special tools required for servicing
•
1 ⁄
2
" – 1" (15 – 25mm) have tee handles
Specifications
A Double Check Valve Assembly shall be installed at each noted
location. The assembly shall consist of two positive seating check
modules with captured springs and rubber seat discs. The check
module seats and seat discs shall be replaceable. Service of
all internal components shall be through a single access cover
secured with stainless steel bolts. The Double Check Valve
Assemblies shall be constructed using Lead Free* cast copper
silicon alloy. Lead Free* Double Check Valve Assemblies shall
comply with state codes and standards, where applicable, requir-
ing reduced lead content. The assembly shall also include two
resilient seated isolation valves; four top mounted, resilient seated
test cocks. The assembly shall meet the requirements of ASSE
Std. 1015 and AWWA Std. C510. Approved by the Foundation for
Cross-Connection Control and Hydraulic Research at the University
of Southern California. Assembly shall be a Watts Series LF007.
Test Cocks
First Check
Module Assembly
The LF007 Series features a modular design concept which facilitates
complete maintenance and assembly by retaining the spring load.
Second Check
Module Assembly
*The wetted surface of this product contacted by consumable
water contains less than 0.25% of lead by weight.
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with-
out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
3 ⁄
4
" (20mm) LF007M3QT
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––
LEAD FREE
*
NOTICE
Inquire with governing authorities for local installation requirements