Watts Fleck 9500 Twin Brass Valve - Manual (Page 3)

Model 9000/9100/9500
3
Job Specifications Sheet
Job Number ___________________________________________
Model Number _________________________________________
Water Test ____________________________________________
Capacity Of Unit ________________________ Max. _____________ Per Regeneration
Brine Tank Size _____________________________________
Salt Setting Per Regeneration ____________________________________
Control Valve Specifications
1. Type of Timer
A. 82 minute available regeneration time, 1/15 RPM
B. 164 minute available regeneration time, 1/30 RPM
2. Type of Meter
3. Timer Gallon Setting ______________________________ gal.
4. Regeneration Program Setting
A. Backwash___________________________________ min.
B. Brine and Slow Rinse _________________________ min.
C. Rapid Rinse _________________________________ min.
D. Brine Tank Refill _____________________________ min.
5. Drain Line Flow Control __________________________ gpm
6. Brine Refill Rate _______________________________ gpm
7. Injector Size _______________________________________
Mechanical Valves
(gallon settings)
Meter Standard Range Extended Range
3/4" 125–2,125 625–10,625
1" 310–5,270 1,150–26,350
1-1/2" 625–10,625 3,125–53,125
Electrical Timers
(minutes per cycle)
Meter ET SE
(0–999.9 minutes per cycle) (0–99 minutes per cycle)
3/4" 9,999,999 9,999
1" 9,999,999 9,999
1-1/2" 9,999,999 —